Research Publications in Journals
    1991-2000

  1. D. P. Mishra,, P. J. Paul and H. S. Mukunda, "Stretch Effects Extracted from Inwardly and Outwardly Propagating Spherical Premixed Flames", Combustion and Flame, 97, pp 35-47, 1994.
  2. D. P. Mishra,, P. J. Paul and H. S. Mukunda, "Stretch Effects Extracted from Propagating Spherical Premixed Flames with Detailed Chemistry", Combustion and Flame, 99, pp.379-386,1994.

    3. 2001-2005

  3. D. P. Mishra, and A Rahaman, "An Experimental Studies of Flammability Limits of LPG/Air Mixtures", Fuel, 82, pp.863-866, 2003.
  4. D. P. Mishra, and R Kannan, "An Experimental of Lean Premixed Combustor", International Journal of Turbo & Jet Engines, 20, No 3, pp. 245-253, 2003.
  5. D. P. Mishra,, "Effects of Initial Temperature on the Structure of Laminar CH4‐Air Premixed Flame", Fuel, 82, page 1471-1475, 2003
  6. D. P. Mishra, and R Kannan, "Experimental Investigation of Lean Premixed Swirl Burner", International Journal of Turbo & Jet Engines, 21, No2, pp.103-113, 2004.
  7. D. P. Mishra,, "Emission Studies of Impinging Premixed Flames", Fuel, 83, pp. 1743-1748, 2004.
  8. D. P. Mishra,, "Numerical Studies of Stretched CH4‐Air Cylindrical Premixed Flames", Fuel, 83, pp. 2345-2350,2004.
  9. Shreekanta Dash, G. C. Dash, and D. P. Mishra,, "Unsteady MHD flow of blood through an indented tube with atherosclerosis", J. AMSE, 73, No 4, pp. 19-30, 2004.
  10. Shreekanta Dash, G. C. Dash, and D. P. Mishra,, "Unsteady magneto hydrodynamic flow of a second-order fluid in a rectangular channel." J. AMSE, 73, No 6, pp. 75-86, 2004.
  11. D. P. Mishra,, "Numerical Modeling of Lean CH4-Air Combustion", Journal of AMSE, Vol 74, No 5, pp.53-62 2005.
  12. D. P. Mishra, and Vishak T, "Numerical Simulation of Cold Flow in an Axisysmmetric Dump Combustor", International Journal of Turbo & Jet Engines, 22, p.237-253,2005.
  13. D. P. Mishra, and D. Mishra, "Augmentation of Local and Average Heat Transfer to an Impinging Air Jets Using Orifice", International Journal of Turbo & Jet Engines, 22, 225-235, 2005.

    14. 2006-2010

  14. Mishra D. P. and T. Desai, "Numerical Study of Mixed Convection Heat Transfer from Thermal Sources on a Vertical Surface", J. AMSE, B 74 (1), pp. 31-44, 2006.
  15. Mishra D. P. and A Rahaman, "An Experimental Study of Stability Limits of LPG-Air Premixed Flames" Journal of Institute of Engineers (India), vol 87, p. 22-24,  2006
  16. D. P. Mishra,, "Effect of Nozzle Geometry of Turbulent Jet on  the Impingement Heat transfer to a Flat Plate", International Journal of Turbo & Jet Engines, vol 23, No 2, p. 87-96, 2006.
  17. Yoshida A, Naito H, Mishra D P, "Structure of Distributed Reaction Zone in a Well‐stirred Reactor, Journal of the Combustion Society of Japan, vol48, No 144, p. 198-205, 2006.
  18. D. P. Mishra,, "Experimental Studies of Flame Stability Limits of CNG-air Premixed Flame", Energy Conversion and Management, V48, 4, p. 1208-1211,  2007.
  19. D. P. Mishra, and S. Kuchibhatla,  "Numerical Studies of a Novel Vortex Combustor, International Journal of Turbo & Jet Engines, Volume 24, No. 2,  2007.
  20. Kiran D. Y. and D. P. Mishra, "Experimental Studies of Flame Stability and Emission Characteristics of Simple LPG Jet Diffusion Flame", Fuel, V86,10-11, P. 1545-1551, 2007
  21. D. P. Mishra, and Vishak T, "Computational Studies of Turbulent Premixed Flame Based Dump Combustor Fuel, V86,  17-18,  2007.
  22. D. P. Mishra, and A Maji, "Numerical Studies of Combustion of Single n-Heptane Droplet", Arcivum Combustionis, V27, No.1-2, pp.45-54,  2007.
  23. P. Kumar and D. P. Mishra, "Experimental Investigation of Laminar LPG‐H2 Jet Diffusion Flame", International Journal of Hydrogen, 33, p.225-231, 2008
  24. D. P. Mishra, and A Maji, "Experiment and Numerical Studies of Combustion of Single n-Heptane Droplet", Journal of Institution of Engineers (India),  V88, P. 3-9, 2007.
  25. Yoshida A, Naito H, Mishra D P, "Turbulent Combustion of Preheated Natural Gas-Air Mixture, Fuel, 87, 605-611, 2008.
  26. K. U. Reddy and D. P. Mishra,, "Studies on Spray Behavior of a Pressure Swirl Atomizer in the Transition Regime", Journal of Propulsion and Power,  vol 24, No1 , P. 74- 80, Jan-Feb2008.
  27. Shreekanta Dash, G. C. Dash, and D. P. Mishra,, "MHD Flow through a porous medium past a stretched vertical  permeable surface in the presence of heat sources/sink and a chemical reaction", Proceedings of the National Academy of  science, India (Section A) , vol 78, P 1, 2008.
  28. D. P. Mishra,, "An Experimental Study of an Impinging LPG/Air Premixed Flame, Journal of Institution of Engineers (India), v88, 1-7, 2008.
  29. D. P. Mishra,, "Experimental Studies of Low Emission LPG Vortex Burner", International Journal of Turbo & Jet Engines, 2008, vol25, No1, p. 27-35.
  30. D. P. Mishra, and  N.  Goyal, "Experimental Study of Internally Mixed Twin-Fluid Liquid Atomizer", International Journal of Turbo & Jet Engines,  Vol 25, No 2, p. 105-110, 2008.  
  31. D. P. Mishra, and P. Kumar, "Experimental investigation of laminar LPG‐H2 jet diffusion flame with preheated reactants, Fuel, 87, p. 3091‐3095, 2008.
  32. S  Mahesh and D. P. Mishra,, "Flame Stability and Emission Characteristics of Turbulent LPG IDF in a  Backstep Burner", Fuel, 87, 2614‐2619, 2008.
  33. P. Kumar  and  D. P. Mishra,, "Effects of Bluff-Body Shape on LPG‐H2 Jet Diffusion Flame, International Journal of Hydrogen, Volume 33, Issue 10, May 2008, p. 2578-2585.
  34. P. Kumar   and  D. P. Mishra,, "Characterization of Bluff-Body Stabilized LPG Jet Diffusion Flame with N2 Dilution", Energy Conversion and Management, Volume 49, Issue 10, October,  P. 2698-2703, 2008.
  35. D. P. Mishra, and P. Kumar,   "Experimental Study of N2 Dilution on Bluff-Body Stabilized LPG Jet Diffusion Flame with Preheated Reactant", Combustion, Explosion, and Shock Waves, Vol. 45, No. 1, p. 1‐7, 2009.
  36. D. P. Mishra, and Kiran Kumar D. Y., "Experimental Studies of the Bluff-body Stabilized Diffusion Flames", Fuel,  88, 573‐578, 2009.
  37. S Panda,  A Uppadhaya, D. P. Mishra,, "Effect of Varying Gas-Flow Conditions on the Characteristics of the Diffusion Flame and Silica Powders Prepared using Flame Combustion Synthesis",  Journal of Powder Technology, 191, 164-169, 2009.
  38. D. P. Mishra, and A Verma,  "Study of Downward Smoldering of Combustion in Polyurethane Foams", Archivum Combustionis, V 29,No. 3-4, 73-80, 2009.
  39. D. P. Mishra, and Maheshwari  M,  "An Experimental Study of Flame Spread over an Inclined Thin Fuel Surface", Archivum Combustionis, V 29,No. 3-4, 101-110, 2009.
  40. K. V. Sridhar and D. P. Mishra,, "Numerical Investigation of Direct Fuel Injection from the Cavity Walls in 2D Supersonic Combustor", International Journal of Turbo & Jet Engines, 26, 155-168, 2009 
  41. N.S. Karan, A. Agrawal, P.K. Pandey, P. Smitha, S.J. Sharma, D.P. Mishra, N.S. Gajbhiye, "Diffusion Flame synthesis of Hollow, Anatase TiO2 Nanoparticles ", Materials Science and Engineering: B, V 163, Issue 2, 128-133, 2009.
  42. D. P. Mishra, and P Kumar, "Experimental study of bluff-body stabilized LPG-H2 jet diffusion flame with preheated reactant" Fuel,  V 89, p.212‐218, 2009.
  43. Ashok Kumar, Ashok Kumar,   D. P. Mishra,,  and Jitendra Kumar, "Flame Aerosol Synthesis And Characterization of Pure And Carbon Coated Titania Nano Powder", Journal of Aerosol Sciences, V 40, 720-730,  2009.
  44. S. Y. Jejurkar and D. P. Mishra,, "A Review of Recent Patents on Micro-combustion and Applications"  Recent Patents on Engineering, V3, No.3,  Pp. 194-209, 2009.
  45. D. P. Mishra,  and R Sundharsan, " Numerical Analysis of Fuel-Air Mixing in a 2D Trapped Vortex Combustor", Proc. IMechE, Part G: J. Aerospace Engineering, 224(G1), 65-75, 2009,
  46. D. P. Mishra,, "Stability and Emission in a LPG-Air Premixed Coaxial Jet Flame Burner under a Wide Range of Operating Condition",  International Journal of Chemical Reactor Engineering, Vol. 7: P. 64, 2009.
  47. S Mahesh and D. P. Mishra,, Flame structure of LPG-air Inverse Diffusion Flame in a Backstep burner, Fuel, 89, 8,  2145-2148, 2010.
  48. D. P. Mishra, and P Kumar, "Effects of N2 Gas on Preheated Laminar LPG Jet Diffusion Flame, Energy Conversion and Management, 51, P. 2144-2149, 2010.
  49. D. P. Mishra, and Singh H J, Numerical Studies of Bluff-Body Stabilized Lean Premixed Flame Based Combustor, Archivum Combustionis, 30, 1-2, P. 63-84,  2010.
  50. D. P. Mishra,  and K. V. Sridhar, "Cold Flow Studies on the Effect of Injector Locations in a Directly Injected Cavity Based Combustor", International Journal of Turbo & Jet Engines, vol 27, No 1, 51-62, 2010. 
  51. Jejurkar S  J  and  D. P. Mishra,, "Numerical Characterization of a Premixed Flame Based Annular Microcombustor", International Journal of Hydrogen, 35, 18, P.9755-9766, 2010.
  52. D. P. Mishra,, Anish Upadhaya, and S S Panda, "Experimental Study of Silica Nano-Powder Synthesis using a Diffusion Flame Reactor", International Journal of Chemical Reactor Engineering, Vol. 8: A149, 2010.

    53. 2011-2015

  53. P. K. Ezhil Kumar, and D. P. Mishra,, "Numerical Modeling of an Axisymmetric Trapped Vortex Combustor", International Journal of Turbo & Jet Engines, Volume 28, Issue 1, pp. 41‐52, 2011.
  54. M. Muralidhar, P. K. Ezhil Kumar, and D. P. Mishra,, "Experimental Investigation of a Twin Fluid Atomizer Spray Using a Laser Based Optical Patternator", International Journal of Turbo & Jet Engines, Vol. 28, Issue 1,  pp. 109‐117, 2011.   
  55. D. P. Mishra, and K. Rukmangdhan, "Experimental Investigation of n-Heptane Droplet at High Pressure Conditions, Archivum Combustionis,  V31, N1-2, pp. 17-27, 2011.
  56. D. P. Mishra, A. Patyal and Manisha, "Effects of Gellant Concentration on the Burning and Flame Structure of Organic Gel Propellant Droplets, Fuel,Volume 90, Issue 5 ,  Pages 1805‐1810, 2011.
  57. S Mahesh and D. P. Mishra,, Study of Turbulent Inverse Diffusion Flame in Recessed Backstep and Coaxial Burners, Combustion, Explosion, and Shock Waves, 4, 2011. 
  58. Jejurkar S  J  and  D. P. Mishra,, "Thermal Performance Characteristics of a Microcombustor for Heating and Propulsion", Applied Thermal Engineering, 31:521-527, 2011.
  59. Jejurkar S  J  and  D. P. Mishra,, "Flame Stability Studies in a Hydrogen-Air Premixed Flame Annular Microcombustor",  International Journal of Hydrogen, vol 36, issue 12, Pages 7326-7338, 2011.
  60. Jejurkar S  J  and  D. P. Mishra,, "Effects of Combustor Geometry on Hydrogen-Air Premixed Flame Combustion in an Annular Microcombustor, Proc. IMechE, Part Journal of Aerospace Engineering, 225:1310‐1321, 2011.  
  61. Jejurkar S  J  and  D. P. Mishra,, "Effects of Wall Thermal Conductivity on Entropy Generation and Exergy Losses in a H2‐Air Premixed Flame Microcombustor",   International Journal of Hydrogen,   36:15851‐15859, 2011.  
  62. Sahoo B. N., Mishra D. P., Gouthama, Effect of Fuels Types on the Flame Synthesized Silica Nanoparticles by Transmission Electron Microscopy Characterization, American scientific publisher, Journal of Advanced Microscopy Research, Vol. 6, 1‐6, 2011.
  63. P. K. Ezhil Kumar and D. P. Mishra,, "Numerical Simulation of Cavity Flow Structure in an Axisymmetric Trapped Vortex Combustor", Aerospace Science and Technology, 21, pp. 16‐23, 2012.
  64. R. Khatry and D. P. Mishra,, "Finite element analysis of bamboo and joints using steel members under various loading conditions for design study, International Journal of Applied Engineering Research V7, Issue 11, Pages 1247-1251, 2012
  65. P K Ezhil Kumar and D. P. Mishra,, "Effect of Momentum Flux Ratio on the Flow and Flame Structure in an Axisymmetric Trapped Vortex Combustor", Fuel, 102, pp. 77-84, 2012.
  66. D. P. Mishra, and A. Patyal, "Effects of Initial Droplet Diameter and Pressure on Burning of ATF Gel Propellant Droplets, Fuel,   Volume 95, pp. 226-233,2012.
  67. D. P. Mishra,  and K. V. Sridhar, Numerical Study of Effect of Fuel Injection Angle on the performance of a 2D Supersonic Cavity Combustor, Journal of Aerospace Engineering, Volume 25, No2, pp. 161-167 2012. 
  68. D. P. Mishra,, S Das, and P K Mohapatra, Effect of A Subsonic Air Stream on a
  69. S Das, and P K Mohapatra, D. P. Mishra,,Two-dimensional Transverse Water Jet, International Journal of Turbo & Jet Engines, Volume 28, Issue 1, pp. 41‐52, 2012.
  70. B. N. Sahoo, D. P. Mishra,, Gouthama, TEM Study of Growth of Silica Nanoparticles in the Flame Synthesis Process by Thermophoretic Sampling Technique, Journal of Advanced Microscopy Research, American scientific publisher, Volume 7, pp. 36-39, 2012.
  71. Jejurkar S  J  and D. P. Mishra,, On the structure of Lean Premixed H2-Air Flames in an Annular Microcombustor", Combustion, Explosion, and Shock Waves, Vol. 48, No. 5,  pp. 497‐507, 2012.
  72. S Mahesh and D. P. Mishra,, Effects of Recessed Air Jet on Turbulent CNG Inverse Diffusion Flame Shape and Luminosity, Combustion, Explosion, and Shock Waves, volume 48, No. 6, pp. 683-688, 2012.
  73. S. Y. Jejurkar and D. P. Mishra,. Numerical analysis of entropy generation in an annular microcombustor using multi step kinetics. Applied Thermal Engineering,  Vol. 52, pp. 394‐401, 2013.
  74. Manisha B. P. and D. P. Mishra,, Synthesis of Jet A1 gel fuel and its characterization for propulsion applications, Fuel Processing and Technology, 106, pp.359‐365, 2013.
  75. Jejurkar S.  Y.  and  D. P. Mishra,, "Characterization of Confined Hydrogen‐Air Jet Flame in a Crossflow Configuration Using Design of Experiments",  International Journal of Hydrogen,  Volume 38, Issue 12,  Pages 5165-5175  2013.
  76.  Manisha B. P. and D. P. Mishra,, Effect of Air Injection Configuration on the atomization of gelled JetA1 fuel in an air-assist internally mixed atomizer, Atomization and Spray, 23(4), pp.327‐341, 2013.
  77. D. P. Mishra, R. Sudarshan and P. K. Ezhil Kumar, "Numerical Study of Flame/Vortex Interactions In 2-D Trapped Vortex Combustor, Journal of thermal science, Vol. 18, No. 4, pp. 1373-1387, 2014.
  78. D. P. Mishra, and Sumit Birwa, "Experimental Characterization of Swirl-Stabilized Kerosene Jet Diffusion Flame", Combustion, Explosion, and Shock Waves, Vol. 48, No. 5,  pp. 497‐507, 2015.
  79. S Mahesh and D. P. Mishra,, Flame Stability Limits and Near Blowout Characteristics of CNG Inverse Jet Flame, Fuel, 153, p267-275, Aug 2015.
  80. P K Ezhil Kumar and D. P. Mishra,, Combustion Noise Characteristics of an Experimental 2D Trapped Vortex Combustor, Aerospace Science and Technology, 2015.
  81. S Mahesh and D. P. Mishra,, Dynamic Sensing of Blowout in Turbulent CNG Inverse Jet Flame,  combustion and Flame,  162, No 8, August 2015, Pages 3046‐3052, 2015.
  82. Jejurkar S.  Y.   and   D. P. Mishra,, "Some Aspects of Stabilization and Structure of Laminar Premixed Hydrogen-Air Flames in a Microchannel", Applied Thermal Engineering,  Vol. 87,  pp. 539-546 2015.
  83. S Mahesh and D. P. Mishra,, Characterization of Swirling CNG Inverse Jet Flame in Recessed Coaxial Burner,  Fuel,  161, Dec 2015.  

    84. 2016-2020

  84. Pravendra Kumar and D. P. Mishra, Numerical Investigation of Merged and Non-merged Flame of a Twin Cavity Annular Trapped Vortex Combustor, Carbon ‐ Sci. Tech. 8/3, 118-128, 2016
  85. P K Ezhil Kumar, P Kumar and D. P. Mishra,, Experimental investigation on the Performance Characteristics of 2D Trapped Vortex Combustor, Journal of Aerospace Engineering, IMechE, part G,  Vol. 230(10) 1840‐1847, 2016.     
  86. Manisha B. P.,  Jejurkar S.  Y.  and D. P. Mishra,, "Experimental Studies on Bluff Body Assisted Airblast Atomizer", Atomization and Spray, 26 (11), 1127-1150, 2016.
  87. Manisha B. P. and D. P. Mishra,, "Experimental Characterization of Gelled Jet A1 Spray Flames", Flow, Turbulence and Combustion, 97 (1),  p1-43, 2016.
  88. Manisha B. P. and D. P. Mishra, "Interactions among Synthesis, Rheology, and Atomization of a Gelled Propellant",  Rheologica Acta. Rheol Acta 55:177‐186, 2016.
  89. P K Ezhil Kumar, and D. P. Mishra,, Flame Stability Characteristics of 2D Trapped Vortex Combustor, Combustion Science and Technology, 2016.  (accepted)
  90. P K Ezhil Kumar, and D. P. Mishra,, Characteristics of Turbulent Flow past Passive Rectangular Cavity at Large Reynolds Numbers, Series C,  Indian Journal of IEI, India Ser. C, pp1-10, 2016. 
  91. Manisha B. P. and D. P. Mishra,, Characteristics of Gelled Jet A1 Sprays Formed by Internal Impingement of Micro Air Jets, Fuel, 185, p599-611, 2016.
  92. Jejurkar S.  Y.  and D. P. Mishra,, Scaling Analysis of a Microcombustor, Chemical Engineering Journal, April, 2017 (accepted)
  93. P K Ezhil Kumar, and D. P. Mishra,, "Numerical Study of Reacting Flow Characteristics of a 2D Twin Cavity Trapped Vortex Combustor", Combustion Theory and Modelling,  Vol. 21(4), pp. 658-676, 2017.
  94. Jejurkar S. Y., Geetanjali, and D. P. Mishra, "Visualizations of sheet breakup of non-Newtonian gels loaded with nanoparticles", International Journal of Multiphase Flow, Vol. 100, pp. 57-76, 2018.
  95. Jejurkar S. Y., Geetanjali, and D. P. Mishra,, "Characterization of impinging jet sprays of gelled propellants loaded with nanoparticles in the impact wave regime, Fuel 228, pp. 10‐22, 2018.
  96. S Mahesh and D. P. Mishra, "Effect of Air jet Momentum on the Topological Features of Turbulent CNG Inverse Jet Flame, Fuel. Volume 241, Pages 1068-1075, 2019.
  97. Vishnu Hariharan and Debi Prasad Mishra, Static Flame Stability of Circumferentially Arranged Fuel Port Inverse Jet Non-Premixed Flame Burner, Combustion Science and Technology, Pages 1493-1519, 2020
  98. Naine Tarun Bharat and Debi Prasad Mishra, Effect of disorderness in two-dimensional discrete adiabatic combustion waves in heterogeneous solid medium under stable regime, Physical Review E, 99, 35-47,2020.
  99. Naine Tarun Bharat, Debi Prasad Mishra and M Kumar, Effect of Heat Loss on Propagation Limits of Combustion Fronts in Heterogeneous Mixtures, Combustion Science and Technology, Volume. 192, NO. 3, 391-415, 2020.
  100. Vishnu Hariharan and Debi Prasad Mishra, Static Flame Stability of Circumferentially Arranged Fuel Port Inverse Jet Non-Premixed Flame Burner, 192(8), 1493-1519,2020
  101. Vishnu Hariharan and Debi Prasad Mishra, Experimental Characterization of Circumferentially Arranged Fuel Port Inverse Jet Diffusion Flame Burner, Combustion Science and Technology, 192(12), 2306-2325,2020
  102. Naine Tarun Bharat, Debi Prasad Mishra and M Kumar, Effect of Heat Loss on Propagation Limits of Combustion Fronts in Heterogeneous Mixtures, Combustion Science and Technology, 192(3),391-415,2020.
  103. Vishnu Hariharan and Debi Prasad Mishra, Entrainment Studies in Inverse Jet Flame Port Burner, Combustion and Flame, 216, 338-353,2020.
  104. Yared Girma Mengistu, Debi Prasad Mishra, and Vishnu Hariharan, Numerical Characterization of 3D Nonreacting Supersonic Cavity Combustor with Inlet Mach Number Variation, International Journal of Hydrogen Energy, 45, 10130-10144,2020.
  105. Debi Prasad Mishra, M Sankarganesh, Numerical analysis of high temperature gas flow through conical micronozzle, International Journal of Turbo & Jet-Engines
  106. Imran Rasheed, Debi Prasad Mishra, Numerical study of a sonic jet in a supersonic crossflow over a flat plate, Physics of Fluids, 32, 126113,2020.
  107. P K Ezhil Kumar, Debi Prasad Mishra, Characteristics of Turbulent Flow Past Passive Rectangular Cavity at Large Reynolds Numbers, Journal of The Institution of Engineers (India): Series C, 101, 937-945, 2020.
  108. Samirsinh P. Parmar and Debi Prasad Mishra, Fractal Geometry in Ancient Indian Water Conservation Structures: Step Wells and Water Tanks, Indian Journal of History of Science, 55.2, 2020.

    109. 2021-2023

  109. Vishnu Hariharan and Debi Prasad Mishra, Characterization of a Novel Elliptical Air-port Inverse Jet Flame, Combustion Science and Technology, 1-19, 2021.
  110. Manisha B Padwal, Benveniste Natan, Debi Prasad Mishra, Gel propellants, Progress in Energy and Combustion Science, 83, 100885, 2021.
  111. Vishnu Hariharan and Debi Prasad Mishra , Dynamic flame stability diagnosis of inverse jet flame using CH* chemiluminescence, Fuel, 285, 119277,2021.
  112. N. Anantha Krishna, Debi Prasad Mishra, Y. V. Mohan Reddy, B. Chandra Mohan Reddy, Indigenous knowledge on ancient Indian alchemical alloying Process, Indian Journal of History of Science volume 56, pages195-203, 2021.
  113. Manisha B Padwal and Debi Prasad Mishra, Performance of two fluid atomization of Gel Propellant, Journal of Propulsion and Power, V38, Issue 1, page-30-39, Jan 2022.
  114. Vishnu Hariharan and Debi Prasad Mishra, Mixing Enhancement of Inverse Jet Flame with Circumferential Fuel Ports, Combustion Science and Technology, 2022 (accepted)
  115. Rishav Aggarwal, Debi Prasad Mishra and Robert J. Poole, Numerical study of wall shear stress fluctuations and near-wall structures in a square duct at low Reynolds numbers, Computers and Fluids, 2022 (accepted)
  116. Naine Tarun Bharat and Debi Prasad Mishra, Effect of Heat Loss on Propagation Limits of Combustion Fronts in Heterogeneous Mixtures, Combustion Science and Technology, 2022. (accepted)
  117. Subrata Mondal, Sougata Barik and Debi Prasad Mishra, Nanocarbon reinforced aluminum matrix (NRAM) composites: Fabrication, structure and properties, Materials Science and Technology, 2022. (accepted)